PSSO

https://www.steinigke.de/psso/
Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn
Germany

Max Albert
max.albert@steinigke.de
  +49 0931 4061 678
en de

PSSO DDA-1700 Amplifier

PSSO

1
2
3
4
5

Technical specifications, datasheets, descriptions and tender texts for PSSO DDA-1700 Amplifier

Info
order code
10451684 
product link
EAN
4026397614459 
Product Name
PSSO DDA-1700 Amplifier 
main features
Stereo PA amplifier with SMPS, 2 x 850 W / 4 ohms
-Stereo PA amplifier with class D circuitry
-Low weight and height due to integrated switch mode power supply
-Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts)
-Limiter and speaker switch-on delay
-3 operating modes can be selected (stereo, parallel or bridged)
-2 calibrated level controls for precise level adjustment
-Input sensitivity adjustable
-LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
-Highly efficient front-to-rear air routing
-Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
-Speaker outputs via lockable Speaker plugs and screw terminals
-Rugged steel chassis with aluminum front panel
-Rack installation with 2 units
-Housing design: (19") 48,3 cm rack installation
-Height unit: 2 U
-Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M) (provided) 
technical overview
Power supply: 100-240 V AC, 50/60 Hz
Power output (RMS):
Stereo, parallel at 4 ohms 2 x 850 W
Stereo, parallel at 8 ohms 2 x 500 W
8 ohms bridged 1 x 1700 W
Signal-to-Noise ratio: >100 dB
Total harmonic distortion:
Damping factor: >500
Voltage gain: 38.2 dB
Slew rate: >10 V/µsec
Input sensitivity: 0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: 4 x XLR
Output connectors: 4 x Speaker, 4 x XLR feed-through output
Circuitry: Class D
Protection: Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals
Cooling: 2 temperature-controlled fans, front-to-rear
Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators: protect, clip, -5 dB, -10 dB, -20 dB (per channel)
Construction: steel chassis, aluminum front
Dimensions: 483 x 307 x 89 mm
Rack installation with 2 U
Weight: 6 kg
Power consumption: 150 W 1/8 power
Frequency range: 20 - 20000 Hz
Height: 8,9 cm
Depth: 30,7 cm
Width: 48,3 cm
Power/channel (4 Ohm): 850 W
Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M)
Power supply: 110-240 V AC, 50/60 Hz 
Audio
Frequency response, from
20 Hz
Frequency response, to
20000 Hz
impedance
20000 ohm
Signal to Noise Ratio
100.00 dB
Voltage Gain, to
38.20 dB
THD (Total Harmonic Distortion)
0.15 %
Connectors
Input XLR
4 pcs
Electrical
power consumption watt, max
150.00 W
AC Volts, min
110 V
AC Volts, max
240 V
power input connector
Powercon 
AC Frequency, min
50 Hz
AC Frequency, max
60 Hz
cooling
active 
Power per channels at 4 Ω
850 W
Power per channels at 8 Ω
500 W
Power per channels at 8 Ω on bridge mode
1700 W
Mechanical
weight
6.00 kg
width
307.00 mm
height
89.00 mm
length
483.00 mm
enclosure material
steel chassis, aluminum front 
height in rack-units
2 U

add to list

Collect interesting products in a list and download tender specifications at once

show list

Downloads
Bedienungsanleitung
00112681.pdf