PSSO

https://www.steinigke.de/psso/
Steinigke Showtechnic GmbH
Andreas-Bauer-Str. 5
97297 Waldbüttelbrunn
Germany

Max Albert
max.albert@steinigke.de
  +49 0931 4061 678
en de

PSSO Amp Set MK2 for Line-Array L

PSSO

1

Technical specifications, datasheets, descriptions and tender texts for PSSO Amp Set MK2 for Line-Array L

Info
order code
11041070 
product link
EAN
4026397635553 
Product Name
PSSO Amp Set MK2 for Line-Array L 
technical overview
10451695 PSSO QDA-4400 4-Channel Amplifier
Power supply: 100-240 V AC, 50/60 Hz
Power output (RMS):
Stereo, parallel at 4 ohms 4 x 1100 W
Stereo, parallel at 8 ohms 4 x 650 W
8 ohms bridged 2 x 2000 W
Signal-to-Noise ratio: >100 dB
Total harmonic distortion:
Damping factor: >500
Slew rate: >10 V/µsec
Crosstalk: >65 dB
Input sensitivity: 0.775 V/1.0 V/1.81 V or 39.3 dB/37 dB/32 dB, switchable
Voltage gain: 39.3 dB
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: 4 x XLR
Output connectors: 4 x Speaker, 4 x XLR feed-through output
Circuitry: Class D
Protection: Soft start, short circuit, over load, over heat, clip limit, RF and VHF signals
Cooling: 2 temperature-controlled fans, front-to-rear
Controls: Power switch, level control, mode switch (stereo,parallel,bridged), input sensitivity
LED indicators: protect, clip, signal, -5 dB, -10 dB, -20 dB (per channel), dB/V mode
Construction: Steel chassis, aluminum front
Dimensions: 483 x 461 x 91 mm
rack installation with 2 U
Weight: 9,5 kg
Power consumption: 830 W 1/8 power
Frequency range: 20 - 20000 Hz
Height: 8,9 cm
Depth: 46,1 cm
Width: 48,3 cm
Power/channel (4 Ohm): 1100 W
Power/channel (8 Ohm): 650 W
Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M)
Power supply: 110-240 V AC, 50/60 Hz
10451696 PSSO QCA-6400 4-Channel SMPS Amplifier
Power supply: 230 V AC, 50 Hz
Power output (RMS):
2 ohms 4 x 1600 W
4 ohms 4 x 1400 W
8 ohms 4 x 800 W
4 ohms bridged 2 x 3200 W
8 ohms bridged 2 x 2800 W
Signal-to-Noise ratio: >80 dB
Total harmonic distortion:
Damping factor: >800
Slew rate: >10 V/µsec
Crosstalk: >65 dB
Input sensitivity: 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable
Voltage gain: 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: 4 x XLR
Output connectors: 4 x Speaker, 4 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling: 2 temperature-controlled fans, front-to-rear
Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators: Protect, clip, signal (per channel)
Construction: Steel chassis, aluminum front panel
Dimensions: 483 x 445 x 89 mm
Rack installation with 2 U
Power consumption: 820,00 W 1/8 power
Weight: 13,45 kg
Power/channel (8 Ohm): 800 W
Power/channel (4 Ohm): 1400 W
Frequency range: 20 - 20000 Hz
Height: 8,9 cm
Depth: 44,5 cm
Width: 48,3 cm
Power connection: Fix Power supply cord with safety plug (M)
Power supply: 230 V AC, 50 Hz
10451697 PSSO QCA-10000 4-Channel SMPS Amplifier
Power supply: 230 V AC, 50 Hz
Power output (RMS):
2 ohms 4 x 2500 W
4 ohms 4 x 2100 W
8 ohms 4 x 1300 W
4 ohms bridged 2 x 5000 W
8 ohms bridged 2 x 4200 W
Signal-to-Noise ratio: >80 dB
Total harmonic distortion:
Damping factor: >800
Slew rate: >10 V/µsec
Crosstalk: >65 dB
Input sensitivity: 0.775 V/1.0 V/1.4 V/38 dB/32 dB/26 dB, switchable
Voltage gain: 40.3 dB (0.775 V), 38 dB (1.0 V), 35.1 dB (1.4 V)
Input impedance: 20 kohms (balanced), 10 kohms (unbalanced)
Input connectors: 4 x XLR
Output connectors: 4 x Speaker, 4 x XLR feed-through output
Protection: Overheat, overload, short-circuit, over-current, DC voltage, softstart, VHF signals
Cooling: 2 temperature-controlled fans, front-to-rear
Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity
LED indicators: Protect, clip, signal (per channel)
Construction: Steel chassis, aluminum front panel
Dimensions: 483 x 445 x 89 mm
Rack installation with 2 U
Power consumption: 1150,00 W 1/8 power
Weight: 13,90 kg
Power/channel (8 Ohm): 1300 W
Power/channel (4 Ohm): 2100 W
Frequency range: 20 - 20000 Hz
Height: 8,9 cm
Depth: 44,5 cm
Width: 48,3 cm
Power connection: Fix Power supply cord with safety plug (M)
Power supply: 230 V AC, 50 Hz
10356364 PSSO DXO-48 PRO Digital Controller
Power supply: 100-240 V AC, 50/60 Hz
Inputs: 4 x XLR, balanced
Maximum input level: +22 dBu
Input impedance: 10 kohms
Dynamic range: 118 dBA
Digital input: 1 x AES/EBU (XLR)
Input impedance: 110 ohms
Outputs: 8 x XLR, balanced
Output impedance: 50 ohms (electronically balanced)
Output gain range: -50 to +12 dB
Maximum output level: +12 dBu
Dynamic range: 118 dBA
Sampling frequency: 65 kHz
Distortion: 0.005 %
Filter types: Bessel, Butterworth or Linkwitz-Riley
Slopes: 6, 12, 18 or 24 dB/octave
Crossover frequency: 20-20000 Hz
Delay: 0 to 2000 ms (inputs/outputs)
Communication: LAN (TCP/IP), USB type B
Dimensions (W x D x H): 482 x 44 x 223 mm
Power consumption: 10,00 W
Weight: 2,7 kg
Frequency range: 10 - 40000 Hz
Height: 4,45 cm
Depth: 22,3 cm
Width: 48,3 cm
Power connection: Mains Input Socket (M) IEC connector (M) mounting version Power supply cord with safety plug (M)
Power supply: 110-240 V AC, 50/60 Hz
30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U
Weight: 0,29 kg
Width: 48,3 cm
Height: 4,45 cm
30109192 ROADINGER Rack Profi KM 8U 55cm with wheels
Strength: 9 mm
Outside dimensions (W x D x H): 530 x 710 x 520 mm
Inside dimensions:
Mounting width: 483 mm (19")
Mounting height: 360 mm (8 U)
Mounting depth: 550 mm
Corner dimensions: 65 mm
Weight: 23,10 kg
Color: Black laminated
Maximum load: 100 kg
Width: 53 cm
Mounting depth min.: ca. 550 mm
Depth: 71 cm
Height: 52 cm
Material: Birch multiplex 9 mm 
main features
10451695 PSSO QDA-4400 4-Channel Amplifier

PA amplifier with SMPS, 4 x 1100 W / 4 ohms, 4 x 650 W / 8 ohms
-4-channel PA amplifier with class D circuitry
-4 x 1100 W/4 ohms
-Low weight and height due to integrated switch mode power supply
-Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
-Speaker switch-on delay
-3 operating modes can be selected (stereo, parallel or bridged)
-4 level controls for precise level adjustment
-Input sensitivity adjustable
-LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
-Complete protection set
-Highly efficient front-to-rear air routing
-Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
-Speaker outputs via lockable Speaker plugs
-Rugged steel chassis with aluminum front panel
-Housing design: (19") 48,3 cm rack installation
-Height unit: 2 U
-Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M) (provided)

10451696 PSSO QCA-6400 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 1600 W / 2 ohms, 4 x 1400 W / 4 ohms
-4-channel PA amplifier with class I circuitry
-4 x 1400 W/4 ohms
-Low weight and height due to integrated switch mode power supply
-Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
-Speaker switch-on delay
-3 operating modes can be selected (stereo, parallel or bridged)
-4 level controls for precise level adjustment
-Input sensitivity adjustable
-LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
-Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
-Highly efficient front-to-rear air routing
-Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
-Speaker outputs via lockable Speaker plugs
-Rugged steel chassis with aluminum front panel
-Rack installation with 2 units
-Neutrik Speakon outputs
-Height unit: 2 U
-Power connection: Fix Power supply cord with safety plug (M)
-Housing design: (19") 48,3 cm rack installation

10451697 PSSO QCA-10000 4-Channel SMPS Amplifier

PA amplifier with SMPS, 4 x 2150 W / 2 ohms, 4 x 2100 W / 4 ohms
-4-channel PA amplifier with class I circuitry
-4 x 2100 W/4 ohms
-Low weight and height due to integrated switch mode power supply
-Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, international concerts)
-Speaker switch-on delay
-3 operating modes can be selected (stereo, parallel or bridged)
-4 level controls for precise level adjustment
-Input sensitivity adjustable
-LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel
-Complete protection set against short-circuit, overheat, clipping, overload, DC voltage and VHF signals
-Highly efficient front-to-rear air routing
-Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs
-Speaker outputs via lockable Speaker plugs
-Rugged steel chassis with aluminum front panel
-Rack installation with 2 units
-Neutrik Speakon outputs
-Height unit: 2 U
-Power connection: Fix Power supply cord with safety plug (M)
-Housing design: (19") 48,3 cm rack installation

10356364 PSSO DXO-48 PRO Digital Controller

Digital speaker management system with real-time network communication, 4 inputs and 8 outputs
-Digital network speaker management system with 64-bit processing
-Premium components ensure excellent sound-features
-Flexible routing configurations for all standard mono and stereo output operating modes
-4 analog inputs and 1digital AES/EBU interface (XLR)
-8 analog outputs (XLR)
-Active frequency filter types (Bessel, Butterworth and Linkwitz-Riley) with slopes up to 24 dB/octave split up the audio signal into different frequency bands
-10-band parametric EQ per input and output
-Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass
-Active crossover with Bessel, Butterworth and Linkwitz-Riley filter with slopes up to 24 dB/octave
-The intelligent software for PC and Mac allows convenient control with a computer
-Full configuration and real-time network communication via the built-in Ethernet interface
-Up to 80 user presets storable in the device via software
-Control of all functions also possible via the controls at the front panel
-Alphanumeric LCD screen with 2 lines of 16 characters each
-Input sensitivity digitally adjustable
-Inputs and outputs with 4-digit VU meter
-Mute switch with LED indicator per output
-Up to 2000 ms signal delay adjustable for the inputs and outputs
-Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
-Switchable phase (180°)
-Lock function for protecting the program settings
-Rack installation, 1 U
-Windows XP, Vista, 7, 8 and Mac OS X 10.5.8 and better
-Control your speaker systems more flexible than ever with the DXO Control app
-DXO Control for iPad supports all functions of the PC software and is available for free from the app store
-PC connect: DXO Software via USB; DXO Software via RJ45 Firmware can be updated
-DSP: Digital signal processor
-Height unit: 1 U
-Housing design: (19") 48,3 cm rack installation
-Power connection: Mains Input Socket (M) IEC connector (M) mounting version Power supply cord with safety plug (M) (provided)

30100150 OMNITRONIC Front Panel Z-19U-shaped, steel,black 1U

U-front panel in different sizes
-1 mm steel, black, powder-coated
-Weight 465-1350 g (depending on the version)
-Height unit: 1 U

30109192 ROADINGER Rack Profi KM 8U 55cm with wheels

PRO flightcase for 483 mm units (19")
-Profile rails with mounting facility for 483 mm units (19"), e.g. light PA amplifiers, power packs, additional equipment
-Stomped profile rails for cage nuts
-2 removable covers (double-door version)
-High-quality workmanship with 9 mm multiplex birch wood, dark brown laminated
-Aluminum profile frames (30 mm) with rounded edges
-Three-leg, medium-sized steel ball corners
-4 x recessed case handles with mounting dish and backing ring
-4 butterfly lock
-4 wheels with 2 brakes
-4 x chrome case handles
-Available in different height units (1 U = 44 mm)
-Made in Europe
-Transport aid: With wheels 
Audio
Frequency response, from
20 Hz
Frequency response, to
20000 Hz
impedance
20000 ohm
Signal to Noise Ratio
100.00 dB
Crosstalk
65.00 dB
Voltage Gain, to
39.30 dB
THD (Total Harmonic Distortion)
0.10 %
Connectors
Input XLR
4 pcs
Electrical
power consumption watt, max
830.00 W
AC Volts, min
110 V
AC Volts, max
240 V
power input connector
Powercon 
AC Frequency, min
50 Hz
AC Frequency, max
60 Hz
cooling
active 
Power per channels at 4 Ω
1100 W
Power per channels at 8 Ω
650 W
Power per channels at 8 Ω on bridge mode
2000 W
Mechanical
weight
9.50 kg
width
461.00 mm
height
91.00 mm
length
483.00 mm
enclosure material
Steel chassis, aluminum front 
height in rack-units
2 U

add to list

Collect interesting products in a list and download tender specifications at once

show list

Downloads
no files provided by the manufacturer