JB-Lighting Lichtanlagentechnik GmbH


JB Lighting Lichtanlagentechnik GmbH
ott@jb-lighting.de
en de

P18 MK2 Wash HP 1.100W

JB-Lighting Lichtanlagentechnik GmbH

1
2
3
4
5
The P18 Wash is a high-performance washlight for large show and theatre stages, with a 1,100 watt white light LED module, gobo wheel with 6 special gobos, a 130° rotatable framing module and Fresnel lens. Fast, precise and extremely quiet – only 28 dB(A) - it provides one highlight after another. It has even undergone a practical upgrade on the outside with two additional carrying handles, which are designed to make handling the 30 kg P18 Wash even easier.

Technical specifications, datasheets, descriptions and tender texts for P18 MK2 Wash HP 1.100W

Info
product description
The enhanced P18 Wash (MK2), with 1,100 watt
white light LED module and Fresnel lens, is not
only more powerful, but very easy to use and
versatile thanks to the extended equipment
package.
Like an experienced stage showmaster, they know
every trick in the book and do their work almost
silently, with absolute precision and reliability. Thanks
to the gobo wheel with 6 special gobos and a 130°
rotatable framing module, the new repertoire of the
P18 Wash will be sure to delight the lighting masters
of large shows and theatre stages. Our premium
washlight has even undergone a practical upgrade
on the outside with two additional carrying handles,
which are designed to make handling the 30 kg
P18 Wash even easier.

The P18 Wash (MK2) from JB Lighting – Quality
“Made in Germany” – with features such as:
• Zoom from 13°– 65° (1:5)
• 1 color wheel with 7 correction filters
• 1 gobo wheel with 6 rotating gobos
• Framing module (rotatable by +/- 65°) with 4 blades,
each blade can be rotated independently by +/- 28°
• 2 infinitely adjustable frost filters (soft edge/flood frost)
• Infinitely adjustable high-speed iris
• Large Fresnel light exit lens
• 4 carrying handles for easy handling
• Ultra-quiet 28 dB(A)
• Graphic display, electronically rotatable and with a
battery backup
• Flicker-free operation, camera mode: 100 | 120 | 600 Hz and 3kHz
In addition, the P18 Wash HP (High Power) has:
• CMY color mixing unit and linear CTO
• 1 color wheel with 6 colors + High CRI filter
In addition, the P18 Wash HC (High CRI):
• CMY color mixing unit and linear CTO
• 1 color wheel with 7 colors
In addition, the P18 Wash WW (Warm White):
• CMY color mixing unit and linear CTB
• 1 color wheel with 7 colors 
product code
VCP186MK2 
tender specification text
P18 MK2 Wash HP (High Power) 1100W

General
LED-based moving head wash light with a white LED light source with 1100 watts. Due to the optical properties, the headlight should be used as a wash light.

Light source standard
The headlight should be equipped with a white 1100W light source. The headlight should produce at least 40000 lumens of output. The color temperature should be approx. 7200 Kelvin. The CRI is said to be greater than 70. The light source should be flicker-free with a max. Repetition frequency of 3 kHz.

Optical system
Requirements for the optical properties of the headlamp are a defined light beam with minimal scattered light, a minimum beam angle of 13 ° and a maximum beam angle of 65 ° (1/10 peak) (1:5). The front lens should consist of a Fresnel lens.

Control
It is controlled via DMX512. The control should be possible via cable as well as a radio DMX built in as standard. A WLAN / Bluetooth module for controlling the headlamp is also to be integrated. The control of the LED module should be possible in at least two different control curves (linear and exponential). Pan / tilt, the color mixing and the rotations / positioning should be controllable in 16bit. The dimmer must work absolutely continuously from 0-100%. In order to adapt to different camera systems, different repetition frequencies (up to 3 kHz) should be selectable for the LED module via DMX / RDM.

Control
The headlamp should be controlled with the control protocols DMX512, RDM, Artnet, sACN, have 5-pin lockable XLR connectors and 2 lockable Ethernet connections (IN and OUT) for connecting the data lines. The selection and storage of all device settings that can be set by the user is to be carried out via an operating panel on the headlamp with a graphic color touch LCD display or via the data line in connection with a control unit. The graphic display should be rotatable. The headlight should have a battery backup for setting the headlight properties, e.g. for setting the DMX address. The headlight should have the option of at least 20 program steps that can be saved on the device. Several headlights should be able to be connected together in the form of a series connection, with one device acting as a master, the program settings of which are to be adopted by the connected headlights.
The spotlight should have a built-in receiver module for control via radio DMX at the factory. The protocol of the radio module must be compatible with lumen radio transmitters.
Five different cooling modes should be able to be set on the headlight, with the quietest mode a volume of 28 dB (A) should be achieved.

Effect unit
The effect unit should have 2 color wheels one with 7 full or semi colors and one with 7 conversion filters, 1 gobo wheel with rotating and interchangeable Gobos, sparkle effect via the effect engine. In addition, the effect unit should also have an 18 slats iris, an aperture slide module (+-65 ° rotatable – each blade +- 28°) with 4 apertures, each aperture completely closing, 2 stepless, interchangeable frost filters and focus. The zoom range should cover at least 13 ° - 65 ° (1/10 peak) (1:5). The color mixing should take place via CMY with a variable CTO.

Installation
The headlamp should have a base and be operated in any position. The headlamp should be installed with two omega brackets that can be screwed together with clamps. The omega brackets should be able to be mounted on the headlamp with Camloc quick-release fasteners. A reinforced anchor point on the basement of the headlight for a safety rope must be available.

Mains connection and power supply
The headlight should be able to be operated with the mains voltages of 100V - 240V and 50 - 60 Hz. The power consumption should be at a maximum of 1500VA. The headlight should have powerCON TRUE1 IN / OUT connections.

Cleaning and maintenance
The headlamp should be as service-friendly as possible. These include easy-to-clean lenses, effects and air filters, as well as slide-in technology for CMY / CTO, color wheels, iris and shutter slides. The slide-in modules must be designed so that they can be pulled out without any tools and additional disconnection of the cable connections! The optical system should be dust-proof. If necessary, the LED module should be able to be replaced by the experienced user himself and without soldering.

Surrounding
The headlamp should be operated in a dry, well-ventilated environment, the temperature of which does not exceed 40 ° C.

Dimensions and weight
Maximum dimensions: W 475 x H 755 x D 307 mm. Weight: 30kg
 
GAEB
TEXT
short summary
The P18 Wash is a high-performance washlight for large show and theatre stages, with a 1,100 watt white light LED module, gobo wheel with 6 special gobos, a 130° rotatable framing module and Fresnel lens. Fast, precise and extremely quiet – only 28 dB(A) - it provides one highlight after another.

It has even undergone a practical upgrade on the outside with two additional carrying handles, which are designed to make handling the 30 kg P18 Wash even easier. 
product type
Moving Light LED Wash 
product link
Connectors
total number of DMX inputs
1 pcs
total number of DMX outputs
1 pcs
DMX connector types
5pin 
total network ports FastEthernet
2 pcs
built-in Switch
yes 
Control
max Dimmer resolution
16 bit
control channels, min
36 ch
control channels, max
54 ch
RDM
yes 
wireless dmx
yes 
protocol-DMX
both 
protocol-Artnet
both 
Electrical
power consumption amps, max
6.25 A
power consumption watt, max
1500.00 W
AC Volts, min
110 V
AC Volts, max
240 V
AC Frequency, min
50 Hz
AC Frequency, max
60 Hz
IP rating
20 
operating temp, max
45.00 °C
PWM rate
3000.00 
built-in dimmer
LED current-controlled 
power input connector
Truecon 
cooling
active 
power output connector
Truecon 
noise level dba at 1m distance
28 db
Mechanical
weight
30.00 kg
width
475.00 mm
height
755.00 mm
length
307.00 mm
pan range
540 °
tilt range
280 °
truss mountable
with optional accessories 
Optical
output lumen, max
40000 lm
beam angle/zoom, min
13.00 °
beam angle/zoom, max
65.00 °
light source
LED 
Number of light sources
1 pcs
wattage per light source
1100.00 W
optics/projection type
Washlight 
LED light source 'look'
single color LED dots 
shutter/strobe frequency, max
20 Hz
variable/linear frost
yes 
color temperature, min
2900 K
color temperature, max
7200 K
min CRI
70 CRI
drop-in frosts
2 pcs
max CRI
85 CRI
lens diameter
170 mm
fixed/virtual colorwheels
2 pcs
gobowheels total
1 pcs
rotating gobowheels
1 pcs
number of rotating gobos
6 pcs
beam shapers/framing/barndoors
yes 
shaper rotation range degrees
65 °
separate CTO wheel
flag 
CMY colormixing
dual flag 

add to list

Collect interesting products in a list and download tender specifications at once

show list