Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 115 W
DMX channels: 16/18/20/21
DMX connection: 5-pin XLR
Sound-control: via built-in microphone
LED type: 50 W RGB (module 3in1)
LED number: 1
Beam angle: 2°
Flash-rate: 20 Hz
Static gobo-wheel: 17 gobos and open
Maximum PAN-movement: 630°
Maximum TILT-movement: 270°
Dimensions (L x W x H): 267 x 298 x 398 mm
Ecodesign regulation: Yes
Special product: Not designed for household room illumination
Purpose: Show effect lighting
Lamp type: LED lamp
Weight: 11,5 kg
Cooling fan: Yes, temperature-controlled
IP classification: IP20
Laser class: Without laser
Power consumption: 115 W
Beam angle: 2°
Height: 39,8 cm
Depth: 26,7 cm
Width: 29,8 cm
Max. PAN movement: Exact positioning (16 bit resolution) 540° Positioning switchable to 630° Pan tilt feedback
Max. TILT movement: Exact positioning (16 bit resolution) 270° Pan tilt feedback
Equipment: Gobos static; Prisma 8-fold; Frost filter; Focus motor-driven
Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M)
DMX channels: 16; 18; 20; 21
LED: 1 x COB (chip-on-board) 50 W 3in1 TCL RGB (homogenous color mix)
Power supply: 110-240 V AC, 50/60 Hz 

PRO beam Moving Head with a 50 W LED and very good RGB color mixing
-Extraordinary projection possibilities, thanks to the RGB LED module (3in1) - even color mixing, sharp, narrow beams, vivid single colors and homogeneous white
-Very narrow illumination angle of 2°
-Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
-Supports RDM (Remote Device Management)
-16, 18, 20 or 21 DMX channels selectable
-8-facet prism and frost filter
-Preset colors and color temperatures (virtual color wheel)
-Gobo wheel with 17 static gobos plus open
-With gobo shake function
-Exact positioning via 16 bit PAN/TILT movement resolution
-Dimmer
-Motorized focus
-Strobe effect with adjustable speed
-Random strobe effect
-Automatic position correction
-PAN angle switchable between 540° and 630°
-Sound-controlled via built-in microphone
-ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
-Control board with graphic LCD and foil-keyboard for adjusting the DMX-starting address, PAN/TILT reverse, reset
-DMX-controlled operation or stand-alone operation with Master/Slave function
-The scenes can be modified via the Control Board or via an external controller and loaded into the memory
-Number of scenes can be changed individually
-Software upload by optional accessories via DMX link
-Power connection via Neutrik PowerCon jack and included power cable
-Feed-through output allows to power up to 8 devices
-DMX control via any standard DMX controller
-Case color: Black
-Effect: Gobo effect
-Projection: flicker-free
-Power out: 1 x Powercon (Power out) gray, mounting version
-Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M) (provided)
-Control: WDMX upgradeable (optional); RDM; DMX; Stand-alone
-LED: 1 x COB (chip-on-board) 50 W 3in1 TCL RGB (homogenous color mix)