Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 155 W
Protocol: Art-Net 3
Signal port: 2 x RJ45 (EtherCon)
DMX control channels: 2/10/12
DMX512 connection: 5-pin and 3-pin XLR
Flash-rate: 18 Hz
Sound-control: via built-in microphone
Number of LEDs: 10
LED type: 17 W WW (COB)
Color temperature: 3000 K
Beam angle: 20°
Dimensions (LxWxH): 875 x 140 x 180 mm
Ecodesign regulation: Yes
Special product: Not designed for household room illumination
Purpose: Show effect lighting
IP classification: IP20
Weight: 9,3 kg
Power consumption: 185 W
Lamp type: LED lamp
Cooling fan: No, cooling by convection
Beam angle: 20°
Height: 18 cm
Depth: 14 cm
Length: 87,5 cm
Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M)
LED: 10 x COB (chip-on-board) 17 W Dim to warm WW (homogenous color mix)
Power supply: 110-240 V AC, 50/60 Hz 

Highpower LED bar with 17 W white light LEDs and dim-to-warm function
-Equipped with ten warm white LEDs
-Particularly bright illuminating power of the LEDs
-CRI of >90
-Color temperature: 3000K
-Removable frost filter
-Homogeneous beams with 20° beam angle
-New LED technology that simulates the color temperature curve of a halogen lamp when dimming
-2, 10, or 12 DMX channels selectable
-Supports RDM (Remote Device Management)
-Each LED can be controlled individually
-Strobe effect speed and dimmer brightness programmable
-Dimmer speed (step response) adjustable
-Strobe effect with 18 flashes per second
-Internal programs
-DMX-controlled, Art-Net-controlled or stand-alone operation with Master/Slave function
-Sound-control via built-in microphone; adjustable sensitivity
-For large stage backgrounds in public places, main halls and lounges
-Hanging as well as standing installation possible
-Locking possibility at the mounting bracket via large metal butterfly screws
-Addressing via control panel with LCD screen and four operating buttons
-EtherCon in/outputs
-Switch-mode power supply for operation between 100 and 240 volts
-Power connection via Neutrik PowerCon jack and included power cable with safety plug
-Feed-through output allows to power up to 8 devices
-DMX control via any standard DMX controller
-Case color: Black
-Color rendering index (CRI) more than: 90 Ra
-Projection: flicker-free
-Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M) (provided)
-Power out: 1 x Powercon (Power out) gray, mounting version
-Control: RDM; ArtNet; Stand-alone; DMX
-LED: 10 x COB (chip-on-board) 17 W Dim to warm WW (homogenous color mix)