Power supply: 100-240 V AC, 50/60 Hz
Protocol: Art-Net 3
Signal port: 2 x RJ45 (EtherCon)
DMX channels: 4/6/8/40/44
DMX connection: 5-pin and 3-pin XLR
Flash-rate: 18 Hz
Sound-control: via built-in microphone
LED number: 10
LED type: 15 W, 4in1 (RGBW)
Beam angle: 4°
Dimensions (L x W x H): 880 x 159 x 178 mm
Ecodesign regulation: Yes
Special product: Not designed for household room illumination
Purpose: Show effect lighting
IP classification: IP20
Lamp type: LED lamp
Weight: 9,5 kg
Power consumption: 170 W
Beam angle: 4°
Height: 17,8 cm
Depth: 15,9 cm
Length: 88 cm
Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M)
DMX channels: 4; 6; 8; 40; 44
LED: 10 x high-power 15 W 4in1 QCL RGBW (homogenous color mix)
Power supply: 110-240 V AC, 50/60 Hz 

Bar with narrow beam 10 x 15 W RGBW LED and frost plate
-Equipped with 10 high-power 4in1 LEDs in the colors red, green, blue and white
-Particularly bright illuminating power of the LEDs
-Collimator lenses for homogeneous beams with 4° beam angle
-Removable frost filter
-4, 6, 8, 40 or 44 DMX channels selectable
-Supports RDM (Remote Device Management)
-Each LED can be controlled individually
-Quick and easy control via Art-Net
-For use via appropriate lighting control software supporting Art-Net
-Programmable color change speed, strobe effect and dimmer
-Dimmer speed (step response) adjustable
-Strobe effect with 1-18 flashes per second
-RGBW color mixing
-Static colors
-Internal programs
-DMX-controlled operation or stand-alone operation with Master/Slave function
-Manual, sound, DMX- or ArtNet-controlled operation
-Sound-control via built-in microphone; adjustable sensitivity
-For large stage backgrounds in public places, main halls and lounges
-Hanging as well as standing installation possible
-Locking possibility at the mounting bracket
-Addressing via control panel with LCD screen and four operating buttons
-EtherCon input and output
-Switch-mode power supply for operation between 100 and 240 volts
-Power connection via Neutrik PowerCon jack and included power cable with safety plug
-Feed-through output allows to power up to 8 devices
-DMX control via any standard DMX controller
-Case color: Black
-Effect: Strobe effect
-Projection: flicker-free
-Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M) (provided)
-Power out: 1 x Powercon (Power out) gray, mounting version
-Control: ArtNet; Stand-alone; DMX
-LED: 10 x high-power 15 W 4in1 QCL RGBW (homogenous color mix)