Info | |
---|---|
order code |
10451685
|
product link | |
EAN |
4026397614466
|
Product Name |
PSSO DDA-2500 Amplifier
|
main features |
Stereo PA amplifier with SMPS, 2 x 1250 W / 4 ohms -Stereo PA amplifier with class D circuitry -Low weight and height due to integrated switch mode power supply -Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts) -Limiter and speaker switch-on delay -3 operating modes can be selected (stereo, parallel or bridged) -2 calibrated level controls for precise level adjustment -Input sensitivity adjustable -LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel -Highly efficient front-to-rear air routing -Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs -Speaker outputs via lockable Speaker plugs and screw terminals -Rugged steel chassis with aluminum front panel -Rack installation with 2 units -Housing design: (19") 48,3 cm rack installation -Height unit: 2 U -Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M) (provided) |
technical overview |
Power supply: 100-240 V AC, 50/60 Hz Power output (RMS): Stereo, parallel at 4 ohms 2 x 1250 W Stereo, parallel at 8 ohms 2 x 700 W 8 ohms bridged 1 x 2500 W Signal-to-Noise ratio: >100 dB Total harmonic distortion: Damping factor: >500 Voltage gain: 39.7 dB Slew rate: >10 V/µsec Input sensitivity: 0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable Input impedance: 20 kohms (balanced), 10 kohms (unbalanced) Input connectors: 4 x XLR Output connectors: 4 x Speaker, 4 x XLR feed-through output Circuitry: Class D Protection: Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals Cooling: 2 temperature-controlled fans, front-to-rear Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity LED indicators: protect, clip, - 5 dB, - 10 dB, - 20 dB (per channel) Construction: steel chassis, aluminum front Dimensions: 483 x 307 x 89 mm Rack installation with 2 U Weight: 6,25 kg Power consumption: 200 W 1/8 power Frequency range: 20 - 20000 Hz Height: 8,9 cm Depth: 30,7 cm Width: 48,3 cm Power/channel (4 Ohm): 1250 W Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M) Power supply: 110-240 V AC, 50/60 Hz |
Audio | |
Frequency response, from |
20 Hz
|
Frequency response, to |
20000 Hz
|
impedance |
20000 ohm
|
Signal to Noise Ratio |
100.00 dB
|
Voltage Gain, to |
39.70 dB
|
THD (Total Harmonic Distortion) |
0.15 %
|
Connectors | |
Input XLR |
4 pcs
|
Electrical | |
power consumption watt, max |
200.00 W
|
AC Volts, min |
110 V
|
AC Volts, max |
240 V
|
power input connector |
Powercon
|
AC Frequency, min |
50 Hz
|
AC Frequency, max |
60 Hz
|
cooling |
active
|
Power per channels at 4 Ω |
1250 W
|
Power per channels at 8 Ω |
700 W
|
Power per channels at 8 Ω on bridge mode |
2500 W
|
Mechanical | |
weight |
6.25 kg
|
width |
307.00 mm
|
height |
89.00 mm
|
length |
483.00 mm
|
enclosure material |
steel chassis, aluminum front
|
height in rack-units |
2 U
|
Collect interesting products in a list and download tender specifications at once
Downloads |
---|
Bedienungsanleitung |
---|
00112681.pdf |