Power supply: 230 V AC, 50 Hz
Output power sine:
Stereo 4 ohms: 2 x 50 W per zone
Stereo 8 ohms: 2 x 25 W per zone
8 ohms bridged: 6 x 100 W
Distortion: 0.1 % (1 kHz)
S/N ratio: 85 dB
Input sensitivity: 250 mV
Input impedance: >47 kohms
Inputs:
1-4: RCA L/R
5: 3.5 mm stereo jack
6: 3.5 mm stereo jack and Toslink
Speaker connectors: Terminal block
Output hub/keypad: RJ-45
Home automation interface: RS-232
Muting: 12 V DC, via 3.5 mm mono jack
Trigger output: 12 V DC, via 3.5 mm mono jack
IR emitter connectors: 12 V DC, via 3.5 mm mono jack
LED indicators (per channel): standby/on, peak
Protection circuits: short-circuit, overheat, overload
Dimensions: 482 x 420 x 102 mm (19", 2 U)
Weight: 13 kg
Power consumption: 1250 W
Power/channel (8 Ohm): 25 W
Power/channel (4 Ohm): 50 W
Frequency range: 20 - 20000 Hz
Height: 8,9 cm
Depth: 42 cm
Width: 48,3 cm
Power connection: Mains Input Socket (M) IEC connector (M) mounting version Power supply cord with safety plug (M)
Power supply: 115/230 V AC, 50/60 Hz 

6-zone audio amplifier with matrix assignment, 2 x 50 W / 4 ohms per zone
-6-zone stereo amplifier for multi-zone PA applications
-Updated version with touch pad wall controller
-12 x 50 W/4 ohms per zone
-Bridge mode with 100 W/8 ohms individually selectable per zone
-Efficient Class D technology
-6 stereo inputs expandable to 18 stereo zones with further units
-Matrix input assignment: input sources are freely assignable to each channel
-6 pre-amp outputs to connect external power amplifiers
-Convenient control via touch pad wall controller or IR remote control
-Incl. 6 wall controllers with touch-sensitive surface (touch pad), LCD with blue backlight and IR receiver
-Wall controller allows selecting the audio source and volume, treble, bass adjustment for each zone individually
-Incl. wall hub for up to 6 wall controllers
-Incl. IR remote control
-Signal inputs: 4 x stereo RCA, 2 x 3.5 mm jack and 1 x Toslink for digital audio signals
-Speaker connection via terminal blocks
-6 zone status indicators on the front panel
-Automatic gain control selectable for level matching of signal sources
-Terminals for IR emitters (accessory) allow extending the IR signals from the remote controls of the signal sources
-RS232 port enables two-way communication with a home automation system
-Trigger input for muting
-6 trigger outputs for switching external amplifiers
-Rack installation with 2 U
-Housing design: (19") 48,3 cm rack installation
-PC connect: RJ45
-Height unit: 2 U
-Power connection: Mains Input Socket (M) IEC connector (M) mounting version Power supply cord with safety plug (M) (provided)
-Control: IR remote control (provided)