Power supply: 100-240 V AC, 50/60 Hz
Laser classification: 2M
Laser modules: Red 100 mW, green 30 mW
Wavelength: Red 650 nm, green 532 nm
LEDs:
Derby (2 x): 3 x RGB, 1 W each
Spots (2 x): 3 x TCL, 3 W each
Strobe: 4 x white, 1 W each
Beam angle: 13° (spots), 8° (strobe)
Flash rate: 0-30 Hz
DMX channels: 3/5/9/27
DMX connection: 3-pin XLR
Sound control: via built-in microphone
Dimensions (L x W x H): 1320 x 145 x 320 mm
Lamp type: LED lamp
Weight: 9,65 kg
IP classification: IP20
Cooling fan: Yes
Power consumption: 50 W
Laser class: Class 2M
Beam angle: 13°
Height: 32 cm
Depth: 14,5 cm
Width: 132 cm
Power connection: Mains Input Socket (M) IEC connector (M) mounting version Power supply cord with safety plug (M)
DMX channels: 3; 5; 9; 27
LED: 4 x high-power 1 W CW; 3 x high-power 3 W 3in1 TCL RGB; 3 x high-power 1 W RGB (homogenous color mix)
Power supply: 110-240 V AC, 50/60 Hz 

Bar with 2 derbies, 2 spots, white strobe LEDs, laser (RG, 2M), foot switch
-4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and white strobe LEDs
-Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
-Ultra-light ideally suited for mobile use
-Crossbar with integrated DMX control unit and stand sleeve
-Comes pre-assembled with practical transport bag
-Convenient control via wireless foot switch and IR remote control
-2 laser diodes project hundreds of red and green laser beams
-2 rotating derbies for mirror ball effects with three bright LEDs (red, green and blue) each
-2 spots three bright TCL LEDs (red, green and blue) each
-4 white strobe LEDs
-Auto, music, master/slave and DMX mode
-37 built-in auto and music show programs that include all 4 effect units
-Addressing and setting via control panel with 4-digit LED display
-Sound-control via built-in microphone with sensitivity control
-LED derbies and LED spots individually adjustable and interchangeable
-Swivel mounting brackets for truss mounting
-When fog is used, this effect becomes especially attractive
-Switch-mode power supply for operation between 100 and 240 Volts
-Feed-through output allows to power up to 8 devices
-Case color: Black
-Laser color: 2in1 BCL RG
-Effect: Multi beam effect; Strobe effect
-Power connection: Mains Input Socket (M) IEC connector (M) mounting version Power supply cord with safety plug (M) (provided)
-Power out: 1 x IEC connector (F) mounting version
-Control: Wireless footswitch (provided); IR remote control (provided); Stand-alone; DMX
-LED: 2 x separate controlling each with 4 x high-power 1 W CW; 2 x separate controlling each with 3 x high-power 3 W 3in1 TCL RGB; 3 x high-power 1 W RGB (homogenous color mix)