Power supply: 100-240 V AC, 50/60 Hz
DMX control channels: 6
DMX512 connection: 3-pin XLR
Flash-rate: 1-20 Hz
LED type: 300 W WW
Number of LEDs: 1
Color temperature: 3500 K
Beam angle: 7-13°
Dimensions (L x W x H): 770 x 270 x 290 mm
Ecodesign regulation: Yes
Special product: Not designed for household room illumination
Purpose: Show effect lighting
Weight: 12 kg
IP classification: IP20
Power consumption: 440 W
Lamp type: LED lamp
Beam angle: 7 - 13°
Height: 29 cm
Width: 27 cm
Length: 77 cm
Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M)
LED: 1 x COB (chip-on-board) 300 W WW (homogenous color mix)
DMX channels: 6
Power supply: 110-240 V AC, 50/60 Hz 

Follow spot with 300 W warm white LED for medium distances, zoom, CRI >80
-Operable in manual mode or via DMX
-DMX512 control possible via any commercial DMX controller (occupies 6 channels)
-Suitable for a projection area from 25 to 50 meters
-Manual control via control panel with buttons and faders
-DMX addressing via LED display and four operating buttons
-Color wheel with 5 different, dichroic color filters and open
-Strobe effect with adjustable speed (1-20 flashes/sec.)
-Four correction filters: CTB, cyan, magenta, yellow
-Steplessly adjustable iris from 5-100%
-Dimmer for stepless adjustment of the light-output brightness between 0 % and 100 %
-Manual focus
-Manual zoom (from 7° to 13°)
-Mounting bracket for installation on a stand
-Equipped with 1 x 300 W LED
-Switch-mode power supply for operation between 100 and 240 volts
-Power connection via P-Con socket and included power cable
-Case color: Black
-Color rendering index (CRI) more than: 80 Ra
-Power connection: Mains Input Socket (M) Powercon (Power-In) blue Power supply cord with safety plug (M) (provided)
-Control: Stand-alone; DMX
-LED: 1 x COB (chip-on-board) 300 W WW (homogenous color mix)