The RTI PIKO RGB 22 OPSL is a compact show laser system ' Made in Germany ' in a durable, dustproof built housing, which is perfectly suitable for challenging show laser applications . 21'500 mW guaranteed output power after optics despite the high power it is possible to reach a maximum scan speed of 60 kpps@8° ILDA high-precision diode arrays (blue, red) provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter green Coherent Taipan OPSL module , which stands out due to beam precision and 8'000 mW power novel method for increasing the beam precision of the single-mode diodes brilliant colors and great color fading the RTI PIKO RGB 22 OPSL impresses with a very bright 638 nm red two blue diode laser modules for more color nuances and higher visibility (6'000 mW / 450 nm & 4'000 mW / 462 nm) newly developed electronics with calibration capability via a browser interface Robust and dustproof housing, which also makes it possible to use it outdoors without problems   This laser system not only impresses by a guaranteed RGB output power of 21'500 mW but also by its four color channels , which enable a broader color spectrum . The broader color spectrum makes the RTI PIKO RGB 22 OPSL ideal for graphics projections .
5'500 mW at 638 nm red provide a powerful red chroma, while the combination of two different blue diode laser modules (6'000 mW / 450 nm & 4'000 mW / 462 nm) enable more color shades and a higher visibility . The red and blue diode laser modules are fabricated by Ray Technologies in Germany, for the green laser source a 530 nm Coherent Taipan OPSL module is used, which stands out due to beam precision and 8'000 mW. The delivery includes an additional adapter to use even a 3 channel software . The RTI PIKO RGB 22 OPSL comes with very fast CT-6210H scanners . The scan speed of 60 kpps@8° ILDA and a maximum scan angle of 60° (@35 kpps) make the system suitable for any kind of application.

By default, the RTI PIKO RGB 22 OPSL is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface . In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone.
Optionally the system can also be operated via LAN, DMX, SD card or in auto mode. W-DMX and a remote control pad are available on request. On the back of the device, there is an 'ILDA-IN' interface as well as an 'ILDA-Through' to loop through the control signal. The emergency stop signal can also be looped through for several RTI NANO laser systems, which means that only one emergency stop is sufficient for all RTI NANO devices connected to one another. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications . The very powerful RTI PIKO RGB 22 OPSL is well-suited for show laser applications in indoor as well in outdoor areas, at concerts, festivals and other large events . Graphics projections and long distance projections are easily possible. The RTI PIKO RGB 22 OPSL is a quality product manufactured in Germany .