| Info | |
|---|---|
| order code |
10451684
|
| product link | |
| EAN |
4026397614459
|
| Product Name |
PSSO DDA-1700 Amplifier
|
| main features |
Stereo PA amplifier with SMPS, 2 x 850 W / 4 ohms -Stereo PA amplifier with class D circuitry -Low weight and height due to integrated switch mode power supply -Reliable power amp with high impulse stability for a wide range of applications (e.g. compact PAs, multi-way PAs, concerts) -Limiter and speaker switch-on delay -3 operating modes can be selected (stereo, parallel or bridged) -2 calibrated level controls for precise level adjustment -Input sensitivity adjustable -LED VU meter and LEDs for activated protective circuit (protect), overload (clip), and signal per channel -Highly efficient front-to-rear air routing -Electronically balanced inputs via XLR mounting jacks, with XLR feed-through outputs -Speaker outputs via lockable Speaker plugs and screw terminals -Rugged steel chassis with aluminum front panel -Rack installation with 2 units -Housing design: (19") 48,3 cm rack installation -Height unit: 2 U -Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M) (provided) |
| technical overview |
Power supply: 100-240 V AC, 50/60 Hz Power output (RMS): Stereo, parallel at 4 ohms 2 x 850 W Stereo, parallel at 8 ohms 2 x 500 W 8 ohms bridged 1 x 1700 W Signal-to-Noise ratio: >100 dB Total harmonic distortion: Damping factor: >500 Voltage gain: 38.2 dB Slew rate: >10 V/µsec Input sensitivity: 0.775 V/1.0 V/1.81 V bzw. 39.3 dB/37 dB/32 dB, switchable Input impedance: 20 kohms (balanced), 10 kohms (unbalanced) Input connectors: 4 x XLR Output connectors: 4 x Speaker, 4 x XLR feed-through output Circuitry: Class D Protection: Softstart, short-circuit, overheat, overload, clip limit, RF and VHF signals Cooling: 2 temperature-controlled fans, front-to-rear Controls: Power switch, input attenuators, mode switch stereo/parallel/bridged, input sensitivity LED indicators: protect, clip, -5 dB, -10 dB, -20 dB (per channel) Construction: steel chassis, aluminum front Dimensions: 483 x 307 x 89 mm Rack installation with 2 U Weight: 6 kg Power consumption: 150 W 1/8 power Frequency range: 20 - 20000 Hz Height: 8,9 cm Depth: 30,7 cm Width: 48,3 cm Power/channel (4 Ohm): 850 W Power connection: Mains Input Socket (M) P-Con (Power-In) Power supply cord with safety plug (M) Power supply: 110-240 V AC, 50/60 Hz |
| Audio | |
| Frequency response, from |
20 Hz
|
| Frequency response, to |
20000 Hz
|
| impedance |
20000 ohm
|
| Signal to Noise Ratio |
100.00 dB
|
| Voltage Gain, to |
38.20 dB
|
| THD (Total Harmonic Distortion) |
0.15 %
|
| Connectors | |
| Input XLR |
4 pcs
|
| Electrical | |
| power consumption watt, max |
150.00 W
|
| AC Volts, min |
110 V
|
| AC Volts, max |
240 V
|
| power input connector |
Powercon
|
| AC Frequency, min |
50 Hz
|
| AC Frequency, max |
60 Hz
|
| cooling |
active
|
| Power per channels at 4 Ω |
850 W
|
| Power per channels at 8 Ω |
500 W
|
| Power per channels at 8 Ω on bridge mode |
1700 W
|
| Mechanical | |
| weight |
6.00 kg
|
| width |
307.00 mm
|
| height |
89.00 mm
|
| length |
483.00 mm
|
| enclosure material |
steel chassis, aluminum front
|
| height in rack-units |
2 U
|
Collect interesting products in a list and download tender specifications at once
| Downloads |
|---|
| Bedienungsanleitung |
|---|
| 00112681.pdf |